- Home›
- Products›
- Embedded›
- Server Adapters›
- PRO-10GbE-CX4›
- Specifications
Intel® PRO/10GbE CX4 Server AdapterSpecifications
back to top
Technical Specifications
| General | |
| Product Code | PXLA8591CX4 |
| Connector | CX4 XPAK module |
| IEEE standards/network topology | 10GBASE CX4 |
| Wiring | CX4 cable |
| Adapter Product Features | |
| Plug and Play specification support |  |
| Easy installation with Intel® PROSet Utility and Intel® PRO Intelligent Install | |
| RoHS compliant | |
| Auto-negotiation, full-duplex capable | |
| Cable distance | To 15 meters, depending on cable gauge and parameters (AWG 24, 20 m; AWG 26, 15 m; AWG 28, 11 m) |
| Network Management | |
| Wired for Management (WfM) baseline v2.0 enabled for servers | Desktop Management Interface (DMI) 2.0 support, Windows Management Instrumentation (WMI), and Simple Network Management Protocol (SNMP)-manageable |
| Advanced configuration and power interface (ACPI) 1.0 power management | |
| Preboot execution environment (PXE)enabled through boot read-only memory (ROM) | |
| Network Operating Systems (NOS) Software Support | |
| Microsoft Windows* 2000 (Server, Advanced Server, Datacenter Server), Server 2003 | Available Q2 2006 |
| Linux* 2.4, 2.6 | |
| FreeBSD 5.3 kernel | |
| Intel Backing | |
| Limited lifetime warranty | |
| 90-day, money-back guarantee (U.S. and Canada) | |
| Advanced Software Features | |
| Adapter fault tolerance (AFT) | |
| Switch fault tolerance (SFT) | |
| Adaptive load balancing (ALB) | |
| Fast EtherChannel*3 (FEC) | |
| Gigabit EtherChannel*3 (GEC) | |
| Teaming support | |
| Multiple teams | |
| Test switch configuration | Tested with major switch original equipment manufacturers (OEMs) |
| Jumbo frames (up to 16 KB) | |
| IEEE 802.1Q* VLANs | |
| IEEE 802.3* support | |
| TCP checksum offload (Rx/Tx TCP, IPv4) | |
| On now/instantly available PCI initiative | |
| TCP segmentation/large send offload | |
| Interrupt moderation | |
| Technical Features | |
| Throughput performance | 5-7 Gbps full-duplex Ethernet performance |
| Bus type | PCI-X* 1.0, PCI local bus interface 2.3 |
| Bus width | 32- and 64-bit |
| Bus mastering | |
| Bus speed (MHz) | 33, 66, and 133 MHz |
| Plug and play support | |
| PCI hot plug/active PCI | |
| Hardware certifications | FCC Class A, UL, CE, VCCI, BSMI, CTICK, MIC |
| Controller-processor | Intel® 82597EX Controller |
| Typical power consumption | <10 W (5 V main, 3.3 V main) |
| Operating temperature | 055 C |
| LEDs | 4 (green): Tx, Rx, link, port identify |
| Physical Dimensions | |
| Length | 16.8 cm (6.6 in) |
| Width | 10.7 cm (4.2 in) |