| Computing Core |
 |
1GHz Intel® Pentium® III processor-Low Power (BGA2) with 100 MHz processor side bus and 256 Kb L2 cache |
|
512 Mbytes to 1 GB ECC SDRAM with L1 and L2 cache memory |
|
Intel® 440 GX chipset |
| Peripherals and I/O |
|
64-bit, 33 MHz CompactPCI* interface |
|
4MB on-board flash memory to support embedded applications |
|
20GB EIDE hard drive and PMC site; optional CompactFlash* carrier mezzanine card available in lieu of hard drive |
|
On-board 10/100 MB Fast Ethernet LAN interfaces |
|
Optional CD-ROM drive mezzanine simplifies installation of software |
|
Universal Serial Bus (USB) |
|
On-board SVGA-compatible CHPS 69000 graphics controller with front-plate video connectors· On-board, two stage programmable watchdog timer (1s, 8s, 64s, 256s) generates nonmaskable interrupt (NMI or processor "INIT") followed by a hardware reset |
| Manageability |
|
Features integrated IPMI-based Baseboard Management Controller (BMC) |
|
Designed to PICMG 2.9 standards |
|
Supports comprehensive, protected lights-out management scheme (with the Intel NetStructure® ZT 7102 Chassis Management Module) |
|
Designed to IPMI 1.0 specifications for standards-based management and increased reliability |
| Ethernet |
|
Two Ethernet ports deliver high networking performance |
|
Can be routed to rear panel through BIOS setup configuration |
|
Auto-configuring RJ-45 front-panel connectors |
|
Link and activity status LEDs |
| Software and Support |
|
Embedded BIOS loaded in on-board flash |
|
User-configurable BIOS to boot an operating system residing in local flash memory, from a fixed or floppy drive, or over a network |
|
PC compatible to run operating systems developed for the PC |
|
Enhanced support provided for Windows* 2000, Linux* and VxWorks* |
|
Additional drivers for select peripherals and flash drives |
