Intel® Pentium® III Xeon® Processor Bus Terminator Design Guidelines
The Intel® Pentium® III Xeon® processor includes termination
circuitry for the microprocessor's Assisted Gunning Transceiver Logic
(AGTL+) bus. In a multiple-processor system each processor location
(slot connector) must be properly terminated, whether or not all locations
have processors installed. This document describes design
considerations for a termination card to occupy unused connector
locations and terminate the bus. These design guidelines include layout
rules and hints based on system design experience. They do not define
a specific card design nor constitute a specification. Card designers will
still need an understanding of the system the card will be used in and will
need to perform the customary simulation and system testing.
- File Name/Size:
- 24518003.pdf
- 111382 bytes
- Download From:
-
FTP Server
-
Web Server (Available for byte serving)
|
