Contents:

• Removing Intel® Pcmcia Faxmodem Software Release 3
• Removing Intel® Pcmcia Faxmodem Software Release 2

Removing Intel® PCMCIA Faxmodem Software Release 3

In some cases, you may have to completely remove (uninstall) the Intel® PCMCIA Faxmodem Software from your hard disk before you can reinstall it.

To remove the Intel® PCMCIA Faxmodem Software (Release 3) from your hard disk, you have to:

• Edit your CONFIG.SYS, WIN.INI, and SYSTEM.INI files;

• Delete all files from one directory;

• Delete the directory itself;

• Delete three (maybe four) files from the Windows directory;

• Delete the Intel PCMCIA Cards groups and icons from the Windows desktop.

These files are plain ASCII text. Before you edit them:

1. Make backup copies of these files under other names.

2. Make sure you use an editor or word processor that can save files as plain ASCII text.

The WIN.INI file is located in the Windows directory.

1. From the [Intel Card Manager] section, delete the lines, [Intel Card Manager] InstallPath=C:\CARDMGR

The SYSTEM.INI file is located in the Windows directory.

1. In the [boot] section, edit the line, comm.drv=ccmcomm.drv

   to read, comm.drv=comm.drv

2. In the [386enh] section, edit the line, device=ccmvcd.386

   to read, device=*vcd

In the CONFIG.SYS file, delete the lines,
REM ==============Intel Card Manager Drivers================
DEVICEHIGH=C:\CARDMGR\CCMSERV.EXE
DEVICE=C:\CARDMGR\RTINIT.EXE /IO=260-26F
DEVICE=C:\CARDMGR\CMGRDRVR.EXE /INST
INSTALL=C:\CARDMGR\CCMGR.EXE /D=0
REM ========================================================

Deleting Added Files and Directories

Note: If you have installed these directories on a drive other than C:, substitute the appropriate drive letter in this list.

1. Delete all files from the C:\CARDMGR directory, and then delete the directory itself.

2. Delete ONLY the following files from the Windows sub-directory: CCMGR.DLL CCMCOMM.DRV CCMVCD.386 EXCAVOYA.INI (if present)

1. Start Windows*.

2. Delete the "Intel PCMCIA Cards" group icon.

3. Delete the "Card Manager" icon from the "Startup" group.

Removing Intel® Pcmcia Faxmodem Software Release 2

In some cases, you may have to completely remove (uninstall) the Intel PCMCIA Faxmodem Software from your hard disk before you can reinstall it.

To remove the Intel PCMCIA Faxmodem Software (Release 2) from your hard disk, you have to:

• Edit your AUTOEXEC.BAT, CONFIG.SYS, WIN.INI, and SYSTEM.INI files;

• Delete all files from six directories;

• Delete the directories themselves;

• Delete seven (maybe eight) files from the Windows directory;

• Delete the PCMCIA Faxmodem Software groups and icons from the Windows desktop.

These files are plain ASCII text. Before you edit them:

1. Make backup copies of each of these files under other names.

2. Make sure you use an editor or word processor that can save files as plain ASCII text

The WIN.INI file is located in the Windows directory.

1. From the [PrinterPorts] section, delete the line, FAXability=FAXABLTY,FAXMODEM,15,45

2. From the [devices] section, delete the line, FAXability=FAXABLTY,FAXMODEM

3. From the [Intel Card Manager] section, delete the lines, [Intel Card Manager] InstallPath=C:\CARDMGR

The SYSTEM.INI file is located in the Windows directory.

1. In the [boot] section, edit the line, comm.drv=excomm31.drv to read, comm.drv=comm.drv

2. In the [386enh] section, edit the line, device=cas31vcd.386 to read, device=*vcd

Also, delete the line,
C:\FAX\CASMODEM.EXE

In the CONFIG.SYS file, delete the lines,
REM ===============Intel Card Manager Drivers================
DEVICE=C:\CARDMGR\SS365SL.EXE /ADA=0
DEVICE=C:\CARDMGR\CS.EXE
DEVICE=C:\CARDMGR\RTINIT.EXE /IO=260-26F
DEVICE=C:\CARDMGR\CMGRDRVR.EXE
REM==========================================================

Deleting Added Files and Directories

Note: If you have installed these directories on a drive other than C:, substitute the appropriate drive letter in this list.

1. Delete all files from the following directories, and then delete the directories themselves:
   C:\CARDMGR
   C:\FAX
   C:\FAX\INBOX
   C:\FAX\OUTBOX
   C:\FAX\QUEUE
   C:\FAX\SAVEDFAX
   

   2. Delete ONLY the following files from the Windows sub-directory: CCMGR.DLL
   EXCOMM31.DRV
   CAS31VCD.386
   CAS.DLL
   FAXABLE.DLL
   FAXABLTY.DRV
   FAXABLTY.INI
   EXCAVOYA.INI (if present)

1. Start Windows.

2. Delete all icons from the "Intel PCMCIA Cards" group.

3. Delete the "Intel PCMCIA Cards" group icon.

4. Delete the "Card Manager" icon from the "Startup" group.

This applies to:

Modems and Fax Boards