Contents:

• Disclaimer For Communications Application Configurations For Intel® Faxmodems
• Winfax Pro 3.0 Recommended Configuration For Intel® Faxmodems

Disclaimer For Communications Application Configurations For Intel® Faxmodems

Intel provides suggested communications application configurations solely as a service to Intel faxmodem customers. Intel assumes no responsibility for errors or omissions in this information. Nor does Intel make any commitment to update this information. If you have questions or problems while configuring a communications application, consult the manual or the manufacturer of the application

Winfax Pro 3.0 Recommended Configuration For Intel® Faxmodems

Delrina Technology, Inc.
416-441-1026

Above information valid as of 4/1/94.

Intel based this recommended configuration upon information provided by Delrina Technology. Contact Delrina Technology if you have any questions or problems while installing or using WinFax Pro.

1. Run the WinFax PRO setup program according to the directions in the WinFax PRO User's Guide.

2. When WinFax PRO 3.0 SETUP asks you to "Select the fax/modem you have installed", select the class type for your Intel Faxmodem.

   Faxmodem	Class Type
   144/144	Class 2
   96/96	Class 2
   24v/96	Class 2
   24/96i	Class 1

3. If WinFax Pro 3.0 SETUP asks if it's OK to change the COMM.DRV= statement in your SYSTEM.INI file, allow it to do so. WinFax Pro 3.0 requires one of these communications drivers:

   COMM.DRV (the standard Windows serial communications driver) TURBOCOM.DRV (a third party communication driver available on many BBS's) WFXCOMM.DRV (Delrina's new communications driver)

   Note: The WFXCOMM.DRV file reportedly allows you to fax at 14.4K bps inside Windows. To receive the new file, download WFXCOM.ZIP from the Delrina BBS or call Delrina Customer support.

4. Answer all other questions according to your preferences.

If you don't always work in Windows*, you can still setup WinFax Pro 3.0 to receive faxes on your faxmodem. WinFax Pro 3.0 includes a TSR program that operates while you are not Windows.

To load the fax TSR program:

1. Change to the directory where you installed WinFax PRO 3.0

2. Type: WFXTSR -w<path>

To unload the fax TSR program:

1. Change to the WinFax PRO 3.0 directory

2. Type: WFXTSR -u

This applies to:

Modems and Fax Boards