System Memory Features
The Desktop Board D865GLC has four DIMM sockets and support the following memory features:

• 2.6 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts
• Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported
• 4 GB maximum total system memory
• Minimum total system memory: 64 MB
• Non-ECC DIMMs
• Serial Presence Detect
• DDR400, DDR333, and DDR266 SDRAM DIMMs

Notes

• Remove the AGP video card before installing or upgrading memory to avoid interference with the memory retention mechanism.
• To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.

Supported system bus frequency and memory speed combinations

Supported DIMM configurations

Tested Memory

3rd Party Tested Memory ^†
Intel provides the Advanced environmental test procedures, test software and necessary hardware to an independent test lab to perform Advanced testing as requested by the memory vendors.
Memory tested by Computer Memory Test Labs (CMTL).

Internal Tested Memory
Intel's has a limited amount of memory tested for the desktop board. These part numbers may not be readily available throughout the product life cycle.

The table below lists parts which passed FULL testing conducted by Intel for the D865GLC Intel® desktop board. For a complete explanation of FULL testing see the Desktop Board Component Functional Testing Levels page.

DDR333

This applies to:

Intel® Desktop Board D865GLC