Search
Support & Downloads
Desktop Boards
Intel® Desktop Board D815EEA2/D815EPEA2
Supported Processors

The Intel® Desktop Board D815EEA2/D815EPEA2 supports a single Pentium® III processor or Intel® Celeron® processor. The system bus speed is automatically selected.The processor connects to the desktop board through the 370-pin FCPGA socket.

Warning: Processors not specifically listed by type and rated speed may have requirements that are not supported by the desktop board's design. Use of unsupported processors may result in improper operation, damage to the desktop board or processor, or reduced product life.
Processor Family Processor Speed System Bus Frequency Cache Size BIOS Version Notes
Pentium® III processor 1.2 GHz 133 MHz 256 KB P12 or greater The following board revisions (AA numbers) support these processors:

A52395-700 or later
A52399-700 or later
A55991-700 or later.

See the board revision note, below, for an explanation.

1.13 GHz 133 MHz 256 KB P04 or greater
1.1 GHz 100 MHz 256 KB P04 or greater All board revisions support these processors
1.0 GHz 133 MHz 256 KB P04 or greater
933 MHz 133 MHz 256 KB P04 or greater
866 MHz 133 MHz 256 KB P03 or greater
850 MHz 100 MHz 256 KB P03 or greater
800EB MHz 133 MHz 256 KB P03 or greater
800 MHz 100 MHz 256 KB P03 or greater
750 MHz 100 MHz 256 KB P03 or greater
733 MHz 133 MHz 256 KB P03 or greater
700 MHz 100 MHz 256 KB P03 or greater
667 MHz 133 MHz 256 KB P03 or greater
650 MHz 100 MHz 256 KB P03 or greater
600EB MHz 133 MHz 256 KB P03 or greater
600E MHz 100 MHz 256 KB P03 or greater
550E MHz 100 MHz 256 KB P03 or greater
533EB MHz 133 MHz 256 KB P03 or greater
500E MHz 100 MHz 256 KB P03 or greater
Intel®
Celeron® processor
1.4 GHz 100 MHz 256 KB P12 or greater The following board revisions (AA numbers) support these processors:

A52395-700 or later
A52399-700 or later
A55991-700 or later.

See the board revision note, below, for an explanation.

1.3 GHz 100 MHz 256 KB P12 or greater
1.2 GHz 100 MHz 256 KB P12 or greater
1.1 GHz 100 MHz 128 KB P12 or greater All board revisions support these processors
1.0 GHz 100 MHz 128 KB P12 or greater
950 MHz 100 MHz 128 KB P12 or greater
900 MHz 100 MHz 128 KB P12 or greater
850 MHz 100 MHz 128 KB P03 or greater
800 MHz 100 MHz 128 KB P03 or greater
766 MHz 66 MHz 128 KB P03 or greater
733 MHz 66 MHz 128 KB P03 or greater
700 MHz 66 MHz 128 KB P03 or greater
667 MHz 66 MHz 128 KB P03 or greater
633 MHz 66 MHz 128 KB P03 or greater
600 MHz 66 MHz 128 KB P03 or greater
566 MHz 66 MHz 128 KB P03 or greater
533A MHz 66 MHz 128 KB P03 or greater

Use of unsupported processors may result in improper operation, damage to the desktop board or processor, or reduced product life. Except as provided in Intel's Terms and conditions of Sale for such products, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF THE INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

Board Revision Note: A small bar-coded label, similar to the diagram shown below, can be found on the component side of the desktop board. The numbers following the letters "AA" can help identify the type and version of your desktop board. The AA contains a 6 digit main number, and a 3 digit dash number (the 3 numbers following the "-".
The statement "...or later" refers to the dash number of the AA (the three numbers following the "-"). If this number is greater than the number listed in the table, the board supports the associated processor(s).

If your 6 digit main number is not listed in the table, contact your system manufacturer for processor support information.

picture of AA barcode


 

This applies to:
Intel® Desktop Board D815EEA2/D815EPEA2



Solution ID: CS-013036
Date Created: 08-Jul-2004
Last Modified: 24-May-2006
Back to Top