|
These .PDF documents list BIOS settings for Intel® Desktop Boards.
The BIOS Setup program can be used to view and change the BIOS settings for the computer and is accessed by pressing the <F2> key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins.
The presence of many BIOS settings are dependent on your board model, hardware components installed, and the BIOS version. BIOS menu titles may differ.
If any problems occur after making BIOS settings changes (poor performance, intermittent issues, etc.), reset the desktop board to default values:
- During boot, enter the BIOS setup by pressing F2.
- Press F9 to set defaults.
- Press F10 to Save and Exit.
If the system locks or won’t boot after making BIOS settings changes, perform a BIOS recovery as described at http://support.intel.com/support/motherboards/desktop/sb/CS-023360.htm.
Note: PDF Files require Adobe Acrobat* Reader*
This applies to:
| 
