|
End of Interactive Support
Intel is announcing the end of interactive support for the Intel® SE440BX Motherboard. See the End of Interactive Support Announcement for details.
The Intel® SE440BX Motherboard supports these processors:
| Processor Family |
Processor Speed |
Notes |
| Pentium® III processors |
450 MHz |
requires BIOS P11 or later |
| Pentium II processors |
450 MHz |
requires BIOS P09 or later |
400 MHz
350 MHz
333 MHz
300 MHz
266 MHz
233 MHz |
| |
Notes:
Pentium® III processors that run internally faster than 450 MHz are not supported because the maximum Icc current required is greater than what can be supplied by the motherboard's on-board voltage regulator. For processor requirements, see the Pentium III processor datasheet.
While the Intel® Celeron® processor uses the same P6 micro architecture as the Pentium II processor, there are some differences. No qualification or compatibility testing has been performed using the Intel Celeron processor and the BIOS does not contain support for this processor. While the Intel Celeron processor may appear to work in a Intel SE440BX Motherboard, the reliability of operation is not known.
Warning: Processors not specifically listed by type and rated speed may have requirements that are not supported by the motherboard's design. Use of unsupported processors may result in improper operation, damage to the motherboard or processor, or reduced product life.
This applies to:
| 
