|
The default jumper settings are correct for most installations.
The chassis intrusion detection jumper should be moved to "disable" if the Intel® N440BX Server Board
will be used in a chassis that does not support a chassis intrusion sensor. To disable, move the chassis
intrusion jumper to position 6-7.
If the chassis supports intrusion detection, the jumper should be moved to disable for
any open chassis testing.
The Intel® Astor and Intel® Columbus II Server Chassis both incorporate a chassis intrusion sensor.
The Wake On LAN* "enable" jumper must be disabled if the feature is not desired or
if your power supply is incapable of providing 800mA of +5V standby current.
Also see the discussion of Fault Resilient Booting (FRB), which is controlled by a board jumper.
This applies to:
| 
