|
Symptom(s):
The message "No video available" may display on remote control console when display resolution is set to 1024x768 with a display refresh rate other than exactly 60Hz.
Cause:
The remote console requires a display setting of 1024x768@60Hz in the blade server operating system.
Solution:
Set the refresh rate to 60Hz in the blade server operating system. To set the refresh rate:
In Windows*:
Right click the desktop, and then click Properties. Click the Settings tab, and then click Advanced. Click the Monitor tab, and then select 60Hz in Screen refresh rate.
In Red Hat* or SuSE* Linux:
Modify the /etc/X11/XF86Config file. In the Monitor section, change the value of VertRefresh to 60, as show in these sample lines:
Section "Monitor"
Identifier "Monitor0"
VendorName "AutoDetected"
ModelName "AutoDetected"
HorizSync 30.0 - 70.0
VertRefresh 60.0
Option "DPMS"
EndSection
Save the file and restart X.
Operating System:
| Windows Server* 2003 Enterprise x64 Edition, SUSE* Linux, Red Hat* Linux Advanced Server 2.x, Windows Server* 2003, Red Hat* Enterprise Linux 3.0, Windows* 2000 Advanced Server |
This applies to:
| 
