|
Solution:
The Intel® Server Chassis SC5200 - Hot Swap Chassis SKU KHD3HSRP650 (pedestal) with TA# A83471-002 or above and the KHD3HSRP650R (rack) with TA# A83472-003 or above support the 5 pin header fan connections used on the Intel® Server Board SE7501HG2 server board. The fan cable used in these hot swap chassis has both a 5 pin connector and a 3 pin connector.
Note: TA# A83471-00X/TA# A83472-00X mentioned above is Intel's Top Assembly number for the Intel® Server Chassis SC5200 and it is printed on the packing label found on the shipping carton (box) and also found on a small label placed on the back (rear) of the Intel® Server Chassis SC5200 near the I/O panel.
The Intel® Server Board SE7501HG2 must use the 5 pin header for connecting the fans to the server board.
Other server boards will use the more common 3 pin header.
The Intel® Server Chassis SC5200 BASE and the Intel® Server Chassis SC5200 Base Redundant Power (BRP) Chassis KHD3BASE450 and KHD3RP450 chassis respectively provide only fan cables with the 3 pin headers. These chassis also support the Intel® Server Board SE7501HG2 and the fan cables must be installed on the Intel® Server Board SE7501HG2 3 pin fan header connection.
The Intel® Server board SE7501HG2 is not supported in the Intel® Server Chassis SC5100 and was never qualified in this chassis.
This applies to:
| 
