The table below contains the Beep Codes for the Intel® Server Platform SPSH4 and SRSH4. For a complete list, please refer to the Technical Product Specification document.

Beep Code Reason 1 One short beep before boot (this is normal, not an error) 1-2 Search for option ROMs. One long, two short beeps on checksum failure 1-2-2-3 BIOS ROM checksum 1-3-1-1 Test DRAM refresh 1-3-1-3 Test 8742 Keyboard Controller 1-3-3-1 Auto size DRAM, system BIOS stops execution here if the BIOS does not detect any usable memory DIMMs 1-3-4-1 Base RAM failure; BIOS stops execution here if entire memory is bad 1-5-1-1 FRB Failure (processor failure) 1-5-2-1 CPU: Empty slot 1-5-2-2 CPU: No processors 1-5-2-3 CPU: Configuration error (e.g. Voltage ID mismatch) 1-5-4-2 Power fault: DC power unexpectedly lost (power control failures) 1-5-4-3 Chipset control failure 1-5-4-4 Power control fault 2-1-2-3 Check ROM copyright notice 2-2-3-1 Test for unexpected interrupts

This applies to:

Intel® Server Platform SPSH4 Intel® Server Platform SRSH4