Search
Support & Downloads
Server Products
Intel® Server Board SE7500CW2
Processors Supported

Intel® Server Board SE7500CW2 is designed to support Intel® Xeon® processors with a 400 MHz system bus speed and 512KB of L2 cache.

Use the Identifying Your Processor web page for detailed specs on your Intel® Xeon® processor.

In a dual processor configuration, Intel requires that the same processor speed, cache size, system bus speed and stepping be used. Mixing processor speeds is not a supported or a recommended configuration.

Supported Boxed Intel® Xeon® processors
Processor Speed System Bus Frequency L2 Cache Stepping MM# Product Code Notes
2.80GHz 400 512K C1 850614 BX80532KC2800D Requires BIOS 1.16 or later
2.60GHz 400 512K C1 850609 BX80532KC2600D Requires BIOS 1.16 or later
2.40GHz 400 512K B0 845163 BX80532KC2400D  
2.40GHz 400 512K C1 851738 BX80532KC2400D  
2.20GHz 400 512K B0 843623 BX80532KC2200D  
2.20GHz 400 512K C1 849356 BX80532KC2200D  
2.00GHz 400 512K B0 843637 BX80532KC2000D  
2.00GHz 400 512K C1 849353 BX80532KC2000D  
1.80GHz 400 512K B0 843620 BX80532KC1800D  
1.80GHz 400 512K C1 849357 BX80532KC1800D  
The processor MM# is provided for your convenience, however, when ordering Boxed Intel® Xeon® processors please use the product order code.

Supported non-boxed Intel® Xeon® processors
Processor Speed System Bus Frequency L2 Cache Stepping MM# Product Code Notes
2.80GHz 400 512K C1 849546 80532KC072512 Requires BIOS 1.16 or later
2.60GHz 400 512K C1 847694 80532KC064512 Requires BIOS 1.16 or later
2.40GHz 400 512K B0 843940 80532KC056512  
2.40GHz 400 512K C1 847695 80532KC056512  
2.20GHz 400 512K B0 839580 80532KC049512  
2.20GHz 400 512K C1 849112 80532KC049512  
2.00GHz 400 512K B0 839575 80532KC041512  
2.00GHz 400 512K C1 849063 80532KC041512  
1.80GHz 400 512K B0 839571 80532KC033512  
1.80GHz 400 512K C1 849064 80532KC033512  


For information on the Intel® Xeon® Processor Product Order Codes, click here.

For information on the Intel® Xeon® Processor Support Components, click here.

Intel recommends that customer purchase boxed processors.

The following table is provided for customers who purchase non-boxed Intel® Xeon® processors. It contains ordering information for processor heatsink and PWT (Processor Wind Tunnel) components. All of these parts are included with the boxed Intel® Xeon® processor.
Part Intel P/N Supplier Address Contact Phone #
Heatsink A53376-001 Furukawa Electric
Order via: Computer Memory Disk Corp.
2380 Qume Drive #D
San Jose, CA 95131
Tomoe Tran (408) 232-9302
Heatsink Clips
(for INT3-mPGA)
A34614-002 Foxconn 6125 Phyllis Drive
Cypress, CA 90630
Katie Wang (714) 890-8668 x814
Heatsink Clips
(for FC-mPGA2P)
A74694-001 Foxconn 6125 Phyllis Drive
Cypress, CA 90630
Katie Wang (714) 890-8668 x814
Heat sink Retention Mechanism
(for SC5200 HSRP)
A46365-001 Trend Technologies 24 Boston Court
Longmont, CO 80501
Lisa Munoz (720) 494-2006
PWT-U Housing
PWT-U CPU Retention
PWT-U Fan Holder
(for SC5200 Base)
A95009-001
A95010-001
A30690-002
Trend Technologies 24 Boston Court
Longmont, CO 80501
Lisa Munoz (720) 494-2006
Fan A46002-001 Sanyo Denke 468 Amapola Ave.
Torrance, CA
90501
Mamoru Yasui (Moe) (310) 783-5423
Grease G751 A80604-001 Shin-Etsu MicroSi, Inc. 10028 S. 51st St.
Phoenix, AZ 85044
Rob Bass (480) 893-8898 x143


For customers in the US and Canada, these parts can be ordered directly from the Intel Support website, http://support.intel.com/support/processors/xeon/spares.htm .

This applies to:
Intel® Server Board SE7500CW2



Solution ID: CS-006879
Date Created: 16-Nov-2003
Last Modified: 30-Aug-2006
Back to Top