Support & Downloads

Browse By Product



Search
Support & Downloads
Server Products
Intel® Server Board SE7500CW2
Main Power Connector Latch on SE7500CW2 Not Long Enough for All Power Supplies

The Intel® Server Board SE7500CW2 is currently shipping with an incorrect version of main 24-pin SSI power supply connector and 8-pin +12V connector on the board. The version that is on these boards has a shorter retention latch and may not allow ATX style power supplies to lock securely into place when installed.

Since ATX power supplies use only a 20-pin power connector, the latch for this connector is off center and may not engage when inserted into a 24-pin SSI power connector found on most Intel server boards. This could cause the power supply connector to become unseated when the system is shipped or when it is handled extensively.

icon TA_569.PDF
Size: 312679 bytes
Date: 8/8/2002 5:57:43 PM

Note: PDF Files require Adobe Acrobat* Reader†



  † This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:
Intel® Server Board SE7500CW2

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.For information on currently available Intel products, please see www.intel.com and/or developer.intel.com
Solution ID: CS-006901
Date Created: 16-Nov-2003
Last Modified: 18-Nov-2003
Back to Top