The Intel® Server Board SE7500WV2 is designed to support Intel® Xeon® processors with a 400 MHz system bus speed and 512KB of L2 cache.

Use the Identifying Your Processor web page for detailed specs on your Intel® Xeon® processor.

Important information when integrating an Intel® Server Board SE7500WV2 on an Intel® Server Chassis SR1300:

When integrating a boxed SE7500WV2 into a SR1300 server chassis, a boxed Intel® Xeon® processor 1U SKU should be used. The processor product code has a "U" indicated at the end of the code. The processor has the necessary 1U heatsink that would fit in a 1U chassis.

Note: Please do not use the foam pad included with the boxed 1U processor.

Important information when integrating an Intel® Server Board SE7500WV2 on an Intel® Server Chassis SR2300:

When integrating a boxed processor SKU using the above combination, please do not use the supplied PWT on the boxed processor. The SR2300 has a supplied air duct which has been tested to thermally cool the processors. Please refer to the SR2300 Guick Start Guide for more information on how to integrate the processor.

In a dual processor configuration, Intel requires that the same processor speed, cache size, system bus speed and stepping be used. Mixing processor speeds is not a supported or a recommended configuration.

Supported Boxed and non-boxed Intel® Xeon® processors

The processor MM# is provided for your convenience, however, when ordering Boxed Intel® Xeon® processors please use the product order code.

Information on the Intel® Xeon® Processor Product Order Codes.

Information on the Intel® Xeon® Processor Support Components.

For customers in the US and Canada, the Intel® Xeon® support components can be ordered directly from the Intel Support Web site http://www.intel.com/buy/components.htm.

Intel recommends that customer purchase boxed processors.

This applies to:

Intel® Server Board SE7500WV2