Support & Downloads

Browse By Product



Search
Support & Downloads
Server Products
Server Products
Hot-Plug PCI Slots Configured at 66MHz by Default [PDF]

The Intel® Server Platform SPSH4 and SRSH4 with baseboard PBA revision -6xx ship from the factory with the PCI Hot-plug (PHP) slots (PCI slots 5-8) configured at 66MHz via jumper blocks 1G and 5H11. These jumpers ground the PCIXCAP signal in each of the PCI segments which causes the chipset to set the specified bus to PCI 66MHz.

icon  Hot-Plug PCI Slots Configured at 66MHz by Default [PDF]
File Name: ta_0587.pdf
Size: 88,536 bytes
Date: August 2002
File Revision: TA-0587-1

Note: PDF Files require Adobe Acrobat* Reader†



  † This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:
Intel® Server Platform SPSH4
Intel® Server Platform SRSH4

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.For information on currently available Intel products, please see www.intel.com and/or developer.intel.com
Solution ID: CS-016818
Date Created: 11-Nov-2004
Last Modified: 16-Nov-2004
Back to Top