|
Make sure you are using the latest driver.
The NDIS3 driver that was released on the "Driver Disk Software Release 1.90" has many improvements, see the Software page. Please be sure to download the latest driver before you install, or begin troubleshooting a problem.
Installation Instructions
- Turn on your computer and load Windows* 95.
- Insert the EtherExpress™ PRO/100 PC Card into a PC Card slot.
- If Windows 95 detects the PRO/100 PC Card, proceed to step 4. If it does not, click on the PC Card (PCMCIA) icon in the Control Panel to enable PC Card services, then go to step 4.
- If prompted for a manufacturer's disk, insert Disk 2, Network Drivers Disk. Windows will identify the product as a "PRO/100 Mobile PC Card Adapter 16." If prompted for Windows 95 files, often times the files are available in the \WINDOWS\OPTIONS\CABS subdirectory on your hard drive.
- Complete the installation process as prompted by the Windows 95 software.
Hints and Tips
Auto-Detection:
For best results with auto-detection, do not load DOS real mode PCMCIA Card and Socket Services and do not use EMM386 (or if needed, do not use the HIGHSCAN keyword). If installing from a SCSI CD-ROM through a PC Card, copy the \WIN95 directory from the CD-ROM to your hard disk (35 MB required) and install from the hard disk.
NetWare* Server is Not Found:
Everything seems to load, the Microsoft Client for NetWare is installed, but the Novell NetWare server cannot be found in the Network Neighborhood. Try forcing the frame type IPX uses to match the one used on the fileserver. Go to My Computer, Control Panel, Network, and IPX/SPX compatible properties, to change the parameter.
This applies to:
| 
