|
If you are using Windows* 95, 98, Me, or Windows NT* 4.0:
- Click Start, Run, Hypertrm, and then click OK.
- Enter Test in the Name box and click OK
- Select your Xircom modem in the Connect using box.
- Enter 12345 in the phone number box and click OK.
- In the Connect window, click Cancel. The Terminal screen (white screen) appears.
- Enter ATI3 and press Enter. The firmware version will be listed on the end of the line that is displayed.
Note: In some cases, you may not see what you are typing. Entering ATI3 and pressing Enter will still work even though you do not see what you are typing.
If you are using Windows 2000:
- Click Start, Settings, and then Control Panel.
- In Control Panel, double-click Phone and Modem Options, and then select Modems.
- Highlight the Xircom modem and click Properties.
- Click the Diagnostics tab, and then click Query Modem.
- In the lower window you will see several AT commands. Scroll down to ATI3. The firmware version will be listed on the end of the line of the Response of ATI3.
This applies to:
| 
