Intel® Pentium® Processor - List of Qualified Sockets, Headers and VRMs

Support & Downloads

Browse By Product

Support & Downloads

Intel® Pentium® Processor

List of Qualified Sockets, Headers and VRMs

Rel. 050997 32

Amp Socket No. Style Drawing No. Part No.

(800) 522-6752 Socket 5 SLAZ, OC, T C-916513 916513

WWW.AMP.COM ^† Socket 5 SLAZ, OC, T C-916560 916560

Socket 5 SLAZ, OC, T C-916655 916655

Socket 5 SLAZ, OC, T C-916656 916656

Socket 5 SLAZ, OC, T C-916671 916671

Socket 5 SLAZ, OC, T C-916672 916672

Socket 7 SLAZ, OC, T C-916637 916637

Socket 7 SLAZ, OC, T C-916657 916657

Socket 7 SLAZ, OC, T C-916658 916658

Socket 7 SLAZ, OC, T C-916714 916714

Socket 7 SLAZ, OC, T C-916715 916715

Socket 7 SLAZ, OC, T C-916716 916716

Socket 8 SLAZ, OC, T C-916679 916679

Socket 8 SLAZ, OC, T C-916680 916680

Socket 8 SLAZ, OC, T C-916681 916681

Socket 8 SLAZ, OC, T C-916682 916682

Socket 8 SLAZ, OC, T C-916738-1 916738-1

Average plating thickness used for qualification testing: 10 micro inches gold. **
Dash number after part no. signifies different pin lengths and are qualified.

Header No. Style Drawing No. Part No.

Header 7 C-146205 146205-1

Header 8 C-146315 146315-1

VRM No. Style Drawing No. Part No.

VRM 7 Linear 869947-1 869947-1

Augat Socket No. Style Drawing No. Part No.

(800) 999-7646 Socket 5 SLAZ, OC, T MP-AX159BCD20 MP-AX159BCD203

Socket 5 SLAZ, OC, T MPAX159BCD20A MP-AX159BCD203-A

Socket 5 SLAZ, OC, T MPAX159BCD20B MPAX159BCD203B

Socket 7 SLAZ, OC, T MP-AX164BCD21X MP-AX164BCD213

Socket 7 SLAZ, OC, T MP-AX164BCD21XA MP-AX164BCD213A

Socket 7 SLAZ, OC, T MP-AX164BCD21XB MP-AX164BCD213B

Average plating thickness used for qualification testing sockets 2, 3 & 6: 15 micro inches gold; socket 5 and Socket 7: 19 micro inches gold.**

Berg/Mckenzie Socket No. Style Drawing No. Part No.

(510) 651-2700 Socket 5 SLAZ, OC, T SAL B 270086-000 ZIF 97050-4020

Socket 5 SLAZ, OC, T SAL B 270086-000 ZIF 97050-4120

Socket 7 SLAZ, OC, T SAL B 270088-000 ZIF 97054-4020

Socket 7 SLAZ, OC, T SAL B 270088-000 ZIF 97054-4120

Average plating thickness used for qualification testing sockets: 35 micro inches gold.**

Chupond Socket No. Style Drawing No. Part No.

(215) 579-0554 Socket 8 SLAZ, OC, T 06844-26387 06844-26387

886-2-992-4716

Average plating thickness used for qualification testing sockets: 20 micro inches gold.**

CAISALES@CONCENTRIC.NET

Header No. Style Drawing No. Part No.

Header 8 14000000-40 14000000-40

Foxconn Socket No. Style Drawing No. Part No.

(408) 749-1228 Socket 5 SLAZ, OC, T 309-0000-066 PZ 32043-S120

Socket 5 SLAZ, OC, T 309-0000-066 PZ 32053-S120

Socket 5 SLAZ, OC, NT 309-0000-049 PZ32023-0120

Socket 5 SLAZ, OC, T 309-0000-049 PZ32033-0120

Socket 5 SLAZ, OC, T 309-0000-049 PZ32043-0120

Socket 5 SLAZ, OC, T 309-0000-049 PZ32053-0120

Socket 7 SLAZ, OC, T 309-0000-067 PZ32143-S120

Socket 7 SLAZ, OC, T 309-0000-067 PZ32153-S120

Socket 7 SLAZ, OC, T 309-0000-062 PZ32143-0120

Socket 7 SLAZ, OC, T 309-0000-062 PZ32153-0120

Socket 8 SLAZ, OC, T 309-0000-065 PZ38763-S220

Socket 8 SLAZ, OC, T 309-0000-065 PZ38773-S220

Average plating thickness used for qualification testing: 10.0 micro inches gold.**

Header No. Style Drawing No. Part No.

Header 7 307-0000-212 HL91157

Header 7 307-0000-212 HL91157-K3

Header 8 307-0000-213 HL92207

Header 8 307-0000-213 HL92207-K3

JAE Socket No. Style Drawing No. Part No.

(800) 523-7278 Socket 5 SLAZ, OC, T SJ029842-E PCPS-ZL320-A9

Socket 5 SLAZ, OC, T SJ029842 PCPS-ZL320-TZA1

Socket 7 SLAZ, OC, T SJ029842-E PCPS-ZL321-A9

Socket 7 SLAZ, OC, T SJ029843 PCPS-ZL321-TZA1

Socket 8 SLAZ, OC, T SJ029980-E PCPS-ZL387-A9

Average plating thickness used for qualification testing: Socket 5/7 3.7 micro inched gold Flash/31.4 micro inches Palladium Nickel ,Socket 8 4.5 micro inched gold Flash/34 micro inches Palladium Nickel. **

Methode Socket No. Style Drawing No. Part No.

(800) 323-6864 Socket 5 SLAZ, OC, T 214-320-2110 214-320-2110

Socket 5 SLAZ, OC, T 214-320-2111 214-320-2111

Socket 5 SLAZ, OC, T 214-320-3110 214-320-3110

Socket 7 SLAZ, OC, T 214-321-2110 214-321-2110

Socket 7 SLAZ, OC, T 214-321-2111 214-321-2111

Socket 7 SLAZ, OC, T 214-321-3110 214-321-3110

Socket 8 SLAZ, OC, T 214-387-3110 214-387-3110

Average plating thickness used for qualification testing: 37.0 micro inches gold

Header No. Style Drawing No. Part No.

Header 8 CA-2803-40 CA-2803-40

Molex Socket No. Style Drawing No. Part No.

(708) 527-4470 Socket 5 SLAZ, OC, T 89235-5310 89235-5310

Socket 7 SLAZ, OC, T 89235-7310 89235-7310

SYSTHENG@USA.MOLEX.COM
Average plating thickness used for qualification testing: 40 micro inches gold **

OTAX Co., Ltd. Socket No. Style Drawing No. Part No.

(408) 526-1200 Socket 5 SLAZ, OC, T KEA391129 SLR -S19-320-LN2

Socket 5 SLAZ, OC, T KEA391169 PL1 -S19-320-LN2-B

Socket 5 SLAZ, OC, T KEA391169 PL1 -S19-320-LN2-C

Socket 7 SLAZ, OC, T KEA391130 SLR -S19-321-LN2

Socket 7 SLAZ, OC, T KEA391135 PL1 -S19-321-LN2-B

Socket 7 SLAZ, OC, T KEA391135 PL1 -S19-321-LN2-C

Average plating thickness used for qualification testing: 11.2 micro inches gold.**

Precicontact Socket No. Style Drawing No. Part No.

Socket 5 SLAZ, OC, T PD104-32025 ZIXP37320TLA3

Socket 6 SLAZ, OC, T PD104-32125 ZIXP37321TLA3

Average plating thickness used for qualification testing: Socket 5 4.7 micro inches gold.**

Producer Socket No. Style Drawing No. Part No.

886-2-202-3578 Socket 5 SLAZ, OC, T PD104-32025 PD104-32025A-2

Socket 7 SLAZ, OC, T PD104-32125 PD104-32125A-2

Socket 8 SLAZ, OC, T PD106-387A5L PD106-387A5LA-2

Average plating thickness used for qualification testing: Socket 5 4.7 micro inches gold.**

Semtech VRM No. Style Drawing No. Part No.

(805) 498-2111 Socket 7 Linear MP54C-VR MP54C-VR

Socket 7 Linear MP54C-VRE MP54C-VRE

NPSMTCHAD@AOL.COM

Yamaichi Socket No. Style Drawing No. Part No.

(800) 769-0797 Socket 5 SLAZ, OC, T KL-13790 NP210-320-0100-CC0

Socket 5 SLAZ, OC, T KL-13425 NP210-320-0100-CC1

Socket 5 SLAZ, OC, T KL-13518 NP210-320-0100-CC2

Socket 5 SLAZ, OC, T KL-13930 NP210-320-0100-CC3

Socket 5 SLAZ, OC, T KS-13625 NP210-320K13625 (D)

Socket 7 SLAZ, OC, T KL-13823 NP210-321-0100-CC1

Socket 7 SLAZ, OC, T KL-13620 NP210-321-0100-CC2

Socket 7 SLAZ, OC, T KL-13938 NP210-321-0100-CC3

Socket 8 SLAZ, OC, T KL-13827 NP210-387-0100-CC1

Socket 8 SLAZ, OC, T KL-13298 NP210-387-0100-CC2

Socket 8 SLAZ, OC, T KL-13951 NP210-387-0100-CC3

Average plating thickness used for qualification testing: 6.1 micro inches gold.**

** The average plating thickness listed is not a recommendation, but rather a measure of what was used for qualification testing. Intel recommends use of gold plating that meets or exceeds the thickness used for the qualification testing for each socket as listed, but not less than 15 micro inches due to the potential for plating process variability. OEMs requesting gold plating thinner than 15 micro inches should further substantiate contact performance.

Test Results:

Socket 5 and Socket 7 test results were obtained by using a 320-pin PGA package with a 0.80 x 1.85 x 1.85" aluminum pin fin heat sink. Total mass of package and heat sink: 84 grams.

Socket 8 test results were obtained by using a 387-pin PGA package with a 1.13 x 2.56 x 2.13 " Delron mass. Total mass of package and heat sink: 250 grams.

Header 7 test results were obtained by using a 30 pin simulation board with a Delron mass attached to simulate circuit and thermal solution weight. Total mass of simulation board and Delron block: 60 grams.

Header 8 test results were obtained by using a 40 pin simulation board with a Delron mass attached to simulate circuit and thermal solution weight. Total mass of simulation board and Delron block: 75 grams.

Legend:

ZIF: Zero Insertion Force BAZ: Bail Actuated ZIF CC: Closed Center

Ext BAZ: Extended BAZ SLAZ: Side Lever Actuated ZIF OC: Open Center

NT: No Tabs T: Tabs (D) Discontinued

The products on this list have been qualified by a independent test facility as passing a standard qualification test suite. Inclusion of a product on this list indicates only that the product has passed this testing and that the vendor has agreed to maintain certain minimum quality assurance requirements directed by Intel. Product design, functionality, and reliability are the sole responsibility of the vendor. INTEL DOES NOT GUARANTEE OR WARRANT THESE PRODUCTS, NOR DOES INTEL GUARANTEE AVAILABILITY OF SUPPLY. Contact the vendors directly for additional information regarding product design, warranty, price and availability.

Only sockets, headers and VRMs for the current generation of Intel processors are listed. Listings of older sockets have been deleted and are no longer maintained with this list.

^† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:

Intel® Pentium® Processor

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.For information on currently available Intel products, please see www.intel.com and/or developer.intel.com

Solution ID: CS-011037
Date Created: 12-May-2004
Last Modified: 08-Oct-2006

Terms of Use
*Trademarks
Privacy