|
If the SATA drive signal cable is routed such that it touches the Ethernet Front Panel (EFP) board, rotational vibration from the fans may be transmitted to the hard drive through the SATA drive connector. This vibration can affect drive performance under some conditions.The long term resolution is to change the fan bracket to isolate the fans with rubber fasteners. Until a new fan bracket design is implemented the immediate corrective action is to route the SATA drive signal cables high enough so they do not touch the EFP board anywhere and transmit the fan vibration.
Note: PDF Files require Adobe Acrobat* Reader†
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
| 
