Search
Support & Downloads
Wireless Products
Intel® PRO/Wireless 2011B LAN Access Point
Technical Specifications

Standards and Manageability
Standards Conformance Wi-Fi* IEEE 802.11b High Rate, 802.3u/100BASE-T, SNMP v2, 802.1H, 802.1d Spanning Tree, 802.11d (International Roaming)
Local Configuration Direct console port (serial EIA-232 DB-9 male)
Remote Configuration HTTP (via Web browser), Telnet, SNMP, FTP, and Intel feature to do bulk configuration to many Access Points
Automatic Configuration BOOTP, DHCP and Automatic Channel Selection
Management Features
  • Client Access Control via MAC address
  • Embedded HTTP Server
  • SNMP traps
  • Multilevel passwords
  • Diagnostic Capabilities
  • Event logging, data packet tracing, SNMP alarm generation, operating statistics
  • Protocol and bandwidth filters
  • Site Survey utility with signal strength logging
  • Roaming Support IEEE 802.11b High Rate compliant with Intel-enhanced roaming features


    Performance
    Range at 1 Mbps (typical)
  • 1500ft (460m) open environment
  • 300ft (90m) office environment
  • Range at 11 Mbps (typical)
  • 400ft (120m) open environment
  • 100ft (30m) office environment
  • Maximum Clients 256
    Antenna Two 1dBi dipole antennas with diversity support, also supports specialty antennas
    Receive sensitivity
  • -90dBm @ 1 Mbps
  • -88dBm @ 2 Mbps
  • -87dBm @ 5.5 Mbps
  • -83dBm @ 11 Mbps
  • Performance Enhancements
  • Proxy ARP
  • Short preamble support
  • QoS Voice and Data Prioritization
  • 802.1H encapsulation
  • Security
  • 64-bit or 128-bit encryption
  • Access control list
  • MD5 member authentication (Mobile IP)
  • Power and Dimensions
    Max Output Power
  • Max: 20 dBm
  • Min: 18 dBm
  • Power Supply
  • Input: 85 to 270V AC
  • Output: 24V DC
  • 24V DC over CAT5 cabling
  • Power Enhancement Power over Ethernet option (eliminates need for AC power at Access Point location)
    Dimensions
  • Length: 24.69cm/9.72in
  • Width: 18.34mm/7.22in
  • Height: 4.85cm/1.91in
  • Weight (w/power supply): 1 lb/0.454kg
  • Safety and Hardware
    Safety Compliance
  • USA/Canada: UL1950/CSA 22.2
  • Europe: CE marked
  • Hardware Shipping Configuration Access point, two dipole antennas, one power supply, one country-specific power supply cord (three in European SKUs), mounting brackets, clips and screws

    This applies to:
    Intel® PRO/Wireless 2011B LAN Access Point



    Solution ID: CS-008104
    Date Created: 06-Jan-2004
    Last Modified: 08-Oct-2006
    Back to Top