|
This applies to Intel® PRO/Wireless 2011/2011B LAN Products.
| PC Card
|
2011
|
2011
with 2.5 Firmware
|
2011B
|
| Variable Transmit Power
|
No
|
Yes
|
Yes
|
| International Roaming
|
No
|
Yes
|
Yes
|
| PROSet User Interface via 3.x software
|
Yes
|
Yes
|
Yes
|
| Firmware Incorporated into Device Driver
|
No
|
No
|
Yes
|
| Intersil* 2.5 Chipset
|
No
|
No
|
Yes
|
Compatible with PCI Carrier
(WPCR2011WW)
|
Yes
|
Yes
|
No
|
|
| Access Point
|
2011
|
2011
with 2.5 Firmware
|
2011B
|
| Variable Transmit Power
|
No
|
Yes
|
Yes
|
| International Roaming
|
No
|
Yes
|
Yes
|
| Enhanced Antenna Port selections
|
No
|
Yes
|
Yes
|
| Integral LinkTest and Antenna Alignment
|
No
|
Yes
|
Yes, 3.51 FW
|
| Extended Range Compensation (Bridge Mode)
|
No
|
Yes
|
Yes, 3.51 FW
|
| Intersil* 2.5 Chipset
|
No
|
No
|
Yes
|
| Automatic Channel Selection
|
No
|
Yes
|
Yes
|
| Ethernet LAN Port
|
10 only
|
10 only
|
10/100
|
| Kensington Lock security capability
|
No
|
No
|
Yes
|
| Improved cosmetics / egg shell white case
|
No
|
No
|
Yes
|
| Rated for installation in plenum type ceilings
|
No
†
|
No
†
|
Yes
|
| 802.1x Security
|
No
|
No
|
Yes, 3.51 FW
|
|
†Yes - with plastics removed
Notes
- The Intel® PRO/Wireless 2011 product family will continue to utilize the 2.x firmware. The Intel PRO/Wireless 2011B product family will utilize 3.x firmware. Important to note is the adapter device driver loads the adapter firmware at runtime in a 2011B adapter - hence a separate firmware update procedure for 2011B adapters is not required. If the 3.x driver detects a 2011 family adapter, it does not load the firmware.
- Neither the PROSet User Interface nor the adapter switching software are supported under Windows* 95 - the installation program will load the WLAN utilities (2.x user interface) for Windows 95.
- The 2011 PC Card requires the 3.0.1 or later software in conjunction with the 2.5 firmware to enable the PC Card capabilities.
- Windows XP is supported by PROSET starting with version 3.1.1 / 6.2.
This applies to:
| 
