Search
Support & Downloads
Wireless Products
Xircom® Wireless Ethernet Access Point (APWE1120)
Specifications

System Requirements
Microsoft Windows* 2000, 98SE,ME, 95 OSR2, or NT*
Microsoft Internet Explorer* 5.0 or 5.5 or Netscape Navigator* 4.78 or 6.0.
IEEE 802.11b compliant Wireless Ethernet Adapters are required for network access.

Data Rates Supported
1, 2, 5.5 and 11 Mbps with auto fallback (auto-rate setting required on Access Point and network devices)

Modulation
11 Mbps and 5.5 Mbps: CCK
2 Mbps: DQPSK
1 Mbps: DBPSK

Network Standard
IEEE 802.11b wireless LAN
IEEE 802.3 wired LAN

Network Interface
10/100 Base-T auto-sensing (RJ-45connector)

Network Protocol
TCP/IP, IPX, NetBEUI, SNMP

Management Utility
Browser-based Access Point Configurator to manage access point and client access control

Security
Supports 40-bit and 128-bit Wired Equivalent Privacy (WEP) encryption

Frequency Band
2400-2483.5 MHz

Wireless Medium
Direct Sequence Spread Spectrum (DSSS)

Media Access Protocol
Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)

Operating Channels
US, Canada: 11 channels
Most European Countries: 13 channels
Japan: 14 channels
France: 4 channels

Simultaneous Channels
Three non-overlapping

Roaming
IEEE 802.11b compliant

Supported Users
Up to 64 simultaneous users

Typical Range at 11 Mbps
Up to 300 ft (90 m) in open environments and 100 ft (30 m) in office environments

Typical Range at 1 Mbps
Up to 1000 ft (300 m) in open environments and 300 ft (90 m) in office environments

Certifications
FCC Class B, FCC Part 15.247, Canada ICES Class B, CE, UL, CSA. Call for other information outside the USA

Power Supply
5V DC External

Antenna
Dual diversity

This applies to:
Xircom® Wireless Ethernet Access Point (APWE1120)



Solution ID: CS-009363
Date Created: 12-Feb-2004
Last Modified: 23-Feb-2004
Back to Top