- Home›
- Hardware Design›
- Platform Memory›
- DDR2 800 MHz Unbuffered Memory Validation Results
DDR2 800 MHz Non ECC and ECC Unbuffered Memory Validation Results
Listed below are the results of testing a small sample of DDR2 DIMM modules on Intel® chipset-based motherboards. We are providing this information as a guide to module performance with Intel® chipset platforms. This testing is not intended to replace the normal OEM component qualification process. For results on specific Intel® motherboards or OEM production motherboards, please refer to the OEM's list of qualified memory suppliers.
Summary of Chipsets Used in Testing
DDR2 800 MHz Non-ECC modules were tested with the Intel® Q965, G965, P965 Express Chipset-based reference boards. DDR2 800 MHz ECC modules were tested with the Intel® 3210 Series Chipset-based reference boards. DDR2-800 testing was performed at CL5 latency conditions. Part numbers for CL5-tested memory are listed below. Intel chipsets that support DDR2-800 also support the corresponding CL6 part number.
DDR2 800MHz Unbuffered DIMM Validation Results
-
Non ECC UDIMM System Validation Results
File Type/Size: PDF 119KB
-
ECC UDIMM System Validation Results
File Type/Size: PDF 45KB
Download UDIMM system validation results.
Approved Test Labs
The following test labs have the capability of performing DDR2 Unbuffered DIMM system-level testing. For further information, please contact:
Advanced Validation Labs.
17665B Newhope Street
Fountain Valley, CA 92708
Attn: Rhonda Duda
Tel: 714-438-2787
Fax: 714-427-3752
Email: sales@validationlabs.com
www.validationlabs.com
